Molds, mildew and fungus are microorganisms. They are found in damp surfaces like bathroom walls, window trims, and in places where water can accumulate like basements that flood.
Mold and fungus organisms will grow on materials that get dampened by water leaks and/or condensation. They can look like black stains, or specks of black, white, orange, green, or brown. These types of microorganisms can cause infections, allergies, asthma, and other breathing problems. There are many types of molds. Take a tour of your home and look for the following;
If you find a leak in your roof or plumbing, mold in any area of your home or flooding in your basement, don't panic! There are steps to take to clean and disinfect the areas that have been affected. Although cleaning walls and floors is laboring and time consuming it is necessary to do it properly to get the best results. If you are unable to remove the mold or do not want to attempt to remove it, seek the services of a mold removal company. But remember, it must be done. The effects of mold are very dangerous so make sure to deal with the problem.
There are many types of mold, some of which can be just a mild nuisance while others can be toxic and can produce serious health problems to those who are exposed to it.
The issue of mold contamination poses a serious health threat for many people who may or may not be aware that they are possibly at risk in their homes, schools and workplaces.
Some types of mold may contain mycotoxins that can be life-threatening to everyone especially infants, the elderly and any person with immune system deficiencies.
Stachybotrys chartarum is a type of toxic mold which will grow anywhere indoors where there is moisture. This type of mold is most commonly found in homes or buildings that have sustained flooding or water damage, roof, wall or floor leaks or condensation.
It continues to grow as long as the area remains damp or wet.
It is usually black in appearance (but can be other colors), slightly shiny at first and powdery when dry.
The World Health Organization and the U.S. Environmental Protection Agency have raised concerns about the dangers of poor air quality and how it is related to SBS (sick building syndrome.)
Mild symptoms to mold exposure can produce flu-like discomforts such as a stuffy nose, eye irritation or wheezing. Severe reactions occur when people are exposed to large amounts of mold which may cause fever and shortness of breath. Those with chronic mold exposure may suffer from obstructive lung disease or lung infections.
Mold is present both indoors and outdoors. It is likely to grow in areas where water and dampness are present.
The effects of mold can be damaging. Not only can mold cause great damage to the area that it grows in, but it can also affect the health of those who are exposed to it.
A physician should be consulted if you suspect that you are suffering from an inhalation exposure illness.
Mold in Furniture – A piece of furniture may become contaminated by mold if it has come into contact with excessive moisture or with settled mold spores. These settled spores might aggravate allergies in some people.
It is highly recommended that affected furniture be removed from the home in order to improve the air quality and reduce the risk of respiratory illnesses.
Cleaning the furniture can not ensure the complete removal of mold. Such items as couches and mattresses must be specially treated in order to completely remove mold. With such items as bed pillows, throw pillows, and stuffed animals, however, it may be more cost effective to dispose of the items than to treat them.
Mold in Wallpaper – In warm environment, vinyl wallpaper can trap moisture-filled air. The trapped moisture serves as a breeding ground for mold. The mold will eat the drywall, the glue that holds the wallpaper, and the wallpaper itself.
It is always a good idea to use paint or apply wall-coverings with permeable paper backings that do not trap moisture on exterior walls.
Mold in Clothing – Mold can be found in damp-ridden clothing. Wearing contaminated clothing may cause allergies and skin irritations.
When cycle is finished, it is recommended that these directions be followed a second time.
Mold in Carpeting – Carpeting that was saturated with water (i.e. from a flood) will most likely grow mold. If the carpet is not removed immediately following saturation, mold spores will settle and affect the air quality of your home. Respiratory problems are a common cause of carpet mold.
Carpet cleaning will not kill the mold. All wet or damp carpeting must be ripped out and thrown away. The longer the carpeting remains in your home, the worse the mold problem will be.
If you have water in your basement, remove as many items as possible furniture, carpeting, and stored boxes of clothing or appliances. Use a disinfectant or chlorine bleach solution to scrub walls, paneling, and sheet rock.
There are two ways to control condensation; insulation and dehumidification. Here are some ways to help keep your basement dry.
Source: www.sump-pump-info. com